SCIREA Journal of Materials (ISSN: 2995-7028)

SCIREA Journal of Materials is an international, scientific peer-reviewed open access journal published online by SCIREA.

Open Access free for readers, with article processing charges (APC)paid by authors or their institutions.

High visibility: Indexed in the Google Scholar and other databases.

Rapid publication: manuscripts are peer-reviewed and a first decision provided to authors approximately 20 days after submission; acceptance to publication is undertaken in 5 days.

Recognition of reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any SCIREA journal, in appreciation of the work done.

Recently Published Papers
Open Access
Osarumwense Peter Osarodion
Abstract: Introduction: Quinazolinone by–product disclosed various curative characteristics such as analgesic, anti-inflammatory and anticancer activities, as well as antimicrobial activity. These heterocycles are beneficial intermediates in organic synthesis. Methods/Experimental:The compound, 6-bromo,2-(o-aminophenyl)
Abstract       References PDF (68383 k) 27 Downloads     107563 Views     DOI: 10.54647/materials430259
Open Access
Jacek Sosnowski
Abstract: Superconducting materials are currently the subject of interest in modern electronic technologies, especially because they exhibit quantum phenomena on a macroscopic scale. The most evident examples are quantized vortices transporting magnetic flux, which movement determines the macroscopic current carrying phenomena in the
Abstract       References PDF (583561 k) 62 Downloads     100853 Views     DOI: 10.54647/materials430241
Open Access
Carolina Gealh Navarro Escobar, John Alexis Dominguez, Giovana Mongruel Gomes, Diego Alonso Melendez Murillo, Bruna Fortes Bittencourt, João Carlos Gomes
Abstract: Purpose: evaluated the effectiveness of the 3D-SR monomer in comparison with the 10-MDP monomer in bond strength (enamel and dentin), nanofiltration (dentin) with application of conventional and self-conditioning modes, sorption and solubility. Materials and methods Seventy-two molars were randomly divided int
Abstract       References PDF (3061383 k) 92 Downloads     95053 Views     DOI: 10.54647/materials430226
Open Access
Hasse Fredriksson
Abstract: Thermal expansion is related to the atomic vibration amplitude. Owing to the anisotropy in the lattice, the amplitude will vary with the crystallographic direction, causing strain in the lattice. The strain caused by thermal expansion induces a force large enough to initiate plastic deformation of the metal at the beginning
Abstract       References PDF (132424 k) 79 Downloads     95110 Views     DOI: 10.54647/materials430219
Open Access
Ramlan, Marzuki Naibaho, Endah Puspita, Yahri Seftiadi, Masno Ginting
Abstract: The synthesis of BaFe12-2xCoxNixO19 (x = 0.5-1.5) at a calcination temperature of 1000°C using the coprecipitation method has been done by varying the concentration of the mixed precursor in order to identify the optimum sample. Barium Hexaferrite powder with 0.5% and 1% Nio-CoO h
Abstract       References PDF (1291968 k) 81 Downloads     94973 Views     DOI: 10.54647/materials430216
Open Access
Qiang Li, Dongbai Xie, Hui Guo
Abstract: To improve AZ31 magnesium (Mg) alloy plasticity, semisolid extruding with electromagnetic stirring process was adopted, and then the mechanical properties and microstructure were studied. The melting temperature was 730℃, and the preheat temperature of the die was set as 300℃, and electromagnetic stirring parameters were 6H
Abstract       References PDF (2193389 k) 89 Downloads     95216 Views     DOI: 10.54647/materials43193
Open Access
Qing Zhou, Liang-Liang Zhang, Ming-Li Xie
Abstract: This paper reports the precipitation of calcium phosphate (CaP) on alkaline hydrothermally treated titanium alloy under ultraviolet (UV) lighting. Urea (NH2CONH2) with different concentrations were added into a simulated body fluid buffered by sodium lactate. CO2 and NH3 gas release during immersion tests were detected. The
Abstract       References PDF (5549568 k) 92 Downloads     95336 Views     DOI: 10.54647/materials43184
Open Access
D. C. Lee
Abstract: This paper is to present the design consideration of the adjustable flexible auxetic structure which is used in the soft wearable suit with the multi-layer materials. In order to design a macro-auxetic structure with the elastic flexibilities of the soft wearable suit, it is important to make the auxetic unit cell with the
Abstract       References PDF (4554892 k) 91 Downloads     95179 Views     DOI: 10.54647/materials43178
Open Access
Ru Fan, Wenbin Wang, Shaohua Wang, Zhi Li, Shuojiang Han, Zhiming Shi
Abstract: Desert sand has the characteristics of large reserves, high quartz content, small and uniform particle size, low organic content and so on. High performance porous ceramic materials were prepared by particle stacking from Kubuqi desert sand, and the effects of forming pressure, holding time and sintering temperature on phas
Abstract       References PDF (17293829 k) 93 Downloads     95904 Views     DOI: 10.54647/materials43168
Open Access
R. Gandhimathi, R. Vidhya, R. Karthikeyan
Abstract: In this investigation, it was proposed to analyze the optimized geometry, density of states (DOS) and electronic band structures of copper (4.16%, 4.16%+oxygen vacancy & 8.33%) doped Titanium Dioxide (Cu-TiO2) photocatalysts using density functional theory corrected for on-site Coulombic interactions (DFT+U). The photocata
Abstract       References PDF (3595434 k) 77 Downloads     95955 Views     DOI: 10.54647/materials43154